Zur Beschreibungsseite auf Commons

Datei:Soyuz 7K-T docking system drawing.svg

aus Wikipedia, der freien Enzyklopädie
Zur Navigation springen Zur Suche springen

Originaldatei(SVG-Datei, Basisgröße: 1.530 × 622 Pixel, Dateigröße: 49 KB)

Diese Datei und die Informationen unter dem roten Trennstrich werden aus dem zentralen Medienarchiv Wikimedia Commons eingebunden.

Zur Beschreibungsseite auf Commons


Beschreibung

Beschreibung

Soyuz internal transfer docking unit. This system is used today for docking spacecraft to Mir. The active craft inserts its probe into the space station receiving cone. The probe tip catches on latches in the socket at the apex of the cone. Motors then draw the two spacecraft together. Latches in the docking collars catch, and motors close them. Fluid, gas, and electrical connections are established through the collars. After the cosmonauts are certain the seal is airtight, they remove the probe and drogue units, forming a tunnel between spacecraft and station. At undocking, four spring push rods drive the spacecraft apart. If the latches fail to retract, the spacecraft can fire

pyrotechnic bolts to detach from the station.
Quelle http://ston.jsc.nasa.gov/collections/TRS/_techrep/RP1357.pdf
Urheber NASA, vectorisation by Adam Rędzikowski

Lizenz

Public domain Diese Datei ist gemeinfrei (public domain), da sie von der NASA erstellt worden ist. Die NASA-Urheberrechtsrichtlinie besagt, dass „NASA-Material nicht durch Urheberrecht geschützt ist, wenn es nicht anders angegeben ist“. (NASA-Urheberrechtsrichtlinie-Seite oder JPL Image Use Policy).
Warnung:

Dateiversionen

Klicke auf einen Zeitpunkt, um diese Version zu laden.

Version vomVorschaubildMaßeBenutzerKommentar
aktuell12:39, 29. Jan. 2013Vorschaubild der Version vom 12:39, 29. Jan. 20131.530 × 622 (49 KB)Adam RędzikowskiUser created page with UploadWizard

Die folgenden 2 Seiten verwenden diese Datei:

Globale Dateiverwendung

Die nachfolgenden anderen Wikis verwenden diese Datei:

Metadaten