Benutzer:Sheogath76/Jacques de Baerze

aus Wikipedia, der freien Enzyklopädie
Zur Navigation springen Zur Suche springen
Dieser Artikel (Jacques de Baerze) ist im Entstehen begriffen und noch nicht Bestandteil der freien Enzyklopädie Wikipedia.
Wenn du dies liest:
  • Der Text kann teilweise in einer Fremdsprache verfasst, unvollständig sein oder noch ungeprüfte Aussagen enthalten.
  • Wenn du Fragen zum Thema hast, nimm am besten Kontakt mit dem Autor Sheogath76 auf.
Wenn du diesen Artikel überarbeitest:
  • Bitte denke daran, die Angaben im Artikel durch geeignete Quellen zu belegen und zu prüfen, ob er auch anderweitig den Richtlinien der Wikipedia entspricht (siehe Wikipedia:Artikel).
  • Nach erfolgter Übersetzung kannst du diese Vorlage entfernen und den Artikel in den Artikelnamensraum verschieben. Die entstehende Weiterleitung kannst du schnelllöschen lassen.
  • Importe inaktiver Accounts, die länger als drei Monate völlig unbearbeitet sind, werden gelöscht.
Vorlage:Importartikel/Wartung-2024-06
Enthauptung Johannes’ des Täufers, Detail aus dem kleinen Retabel in Dijon

Jacques de Baerze (aktiv vor 1384; † nach 1399) war ein flämischer Holzbildhauer.

Zwei seiner Hauptwerke befinden sich bis heute in Dijon, der damaligen Hauptstadt des Herzogtums Burgund.

De Baerze probably came from Ghent, and lived in Dendermonde (Termonde in French) some thirty kilometres away, which is also not far from Antwerp and Brussels. He was clearly a well-established master before the death in January 1384 of the local ruler, Louis II of Flanders, Duke of Brabant, as two commissions from Louis to produce carved altarpieces are recorded, though the works have not survived. These were for the chapel of the castle of Dendermonde, and the hospice of the Cistercian abbey of Bijloke, then just outside Ghent.

These works were noticed by Philip the Bold, Duke of Burgundy, Louis' son-in-law and successor as Count of Flanders. In 1385 Philip had founded a Carthusian monastery, the Charterhouse of Champmol, then just outside Dijon, as the dynastic burial-place of the Burgundian Valois, and was filling it with impressive works of art. In 1390, he commissioned de Baerze to create two similar altarpieces for Champmol: one, now known as the Altar of Saints and Martyrs for the chapter house, and the larger, now known as the Retable of the Crucifixion, for the main altar of the church. Both are triptychs with hinged wings, carved on the interior, but the exterior panels, showing when the wings were closed, were to be painted by his court artist Melchior Broederlam (another Fleming who also previously worked for Louis) — a common arrangement for a grand altarpiece. These painted outer panels only survive for the larger of the two retables. The triptychs would normally be shown closed, displaying the paintings, but opened to show the carvings for feast days.

The iconography of the two artists' elements was designed to complement each other, with a painted sequence of scenes from the Infancy of Christ and within, carved scenes of the Adoration of the Magi, the Crucifixion in the centre, and the Entombment of Christ, flanked by saints on the inside of the side-panels.[1] Above there is elaborate Gothic tracery with small figures of saints and angels. The whole of both works is either gilded or painted. The Altar of Saints and Martyrs is 159 cm high, and 252 cm wide with the wings open. For the Retable of the Crucifixion the equivalent figures are 167 cm and 252 cm.

The retables were transported to Dijon from Dendermonde in August 1391, but were returned to Flanders a year later. There, the painting and gilding was finished by Broederlam at his studio in Ypres; guild regulations usually mandated that the carving and painting or guilding were performed by members of different guilds. They were returned to Champmol, approved by a committee including Claus Sluter, and installed by the end of 1399, after which de Baerze disappears from documented records.

The altarpieces were moved after the French Revolution to the Musée des Beaux-Arts de Dijon, along with the Broederlam panels,[2] which now, unlike at the time of their creation, receive more attention than the carvings, as they are of great significance in the development of Early Netherlandish painting,[3] and painting is generally of greater interest to modern art historians than sculpture. De Baerze's two retables are probably the earliest Netherlandish examples to survive complete, although there were evidently many more such works in existence by this date, and the form probably developed first in the Low Countries. With hardly any works from the period to compare to those in Dijon, it is hard to assess the originality of de Baerze, or his place in the tradition, though he clearly participates in the International Gothic style of the period. Presumably most of his work was for local churches and religious houses. In fact the iconoclasm after the Reformation was so destructive of Netherlandish wood-carved altars that only a few fragments survive there from the following eighty years, while Germany has many examples.[4]

Kreuzigungsretabel aus der Kartause Champmol

[Bearbeiten | Quelltext bearbeiten]
  • mit Melchior Broederlam: Altarkreuz für den Altar in der Kartause Champmol, um 1391–99. (28 cm hoch, Walnuss mit Resten originaler Vergoldung; Art Institute of Chicago, Inv. Nr. 1944.1370)[5]
  • Heiliger Georg, Ende 14. Jahrhundert. (Walnuss; Zagreb, Mimara-Museum)[6]
  1. Snyder, James; Northern Renaissance Art, pp. 73 and 294, 1985, Harry N. Abrams, Vorlage:ISBN
  2. Dijon Museum
  3. Snyder, 71 and 293–4
  4. Snyder, 293–4
  5. Corpus of Christ, from the Altarpiece of the Crucifixion. Art Institute Chicago, abgerufen am 25. Juni 2024 (englisch).
  6. Zbirka europske skulpture. Izdvojeni predmeti. Muzej Mimara, abgerufen am 25. Juni 2024 (kroatisch).